ACME PAGEANT 300ZR II User Manual page 13

Backlight Intensity
To select Backlight Intensity, press the ENTER button to confirm. Use the UP/DOWN button
to adjust the intensity from 1 (dark) to 10 (bright). Once selected, press the ENTER button to setup
and store. Press the MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
Temperature Unit
To Select Temperature Unit, press the ENTER button to confirm. Use the UP/DOWN button to
select ℃ or ℉, press the ENTER button to store. Press the MENU button back to the last menu
or let the unit idle one minute to exit menu mode.
Display Warning
To select Display Warning, press the ENTER button to confirm. Use the UP/DOWN button to
select No (Normal) or Yes (display will show the error warning when the unit went wrong), press
the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Language
To select Language, press the ENTER button to confirm. Use the UP/DOWN button to select
English or Chinese, press the ENTER button to store. Press the MENU button back to the last menu
or let the unit idle one minute to exit menu mode.
Fixture Test
Enter MENU mode, select Fixture Test, press the ENTER button to confirm, use the UP/DOWN
button to select Auto Test or Manual Test.
Auto Test
To select Auto Test, press the ENTER button, the unit will run built-in programs to
automatically test pan, tilt and zoom. Press the MENU button back to the last menu or exit menu
mode after auto test.
12G