ACME PAGEANT 300ZR II User Manual page 12

Linear: The increase in light intensity appears to be linear as DMX value is increased.
Square Law: Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law: Light intensity control is coarser at low levels and finger at high levels.
S-cure: Light intensity control is finger at low levels and high levels and coarser at medium levels.
Dimmer Speed
To select Dimmer Speed, press the ENTER button to confirm. Use the UP/DOWN button to
select Fast or Smooth. Once selected, press the ENTER button to setup. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Display Setting
Enter MENU mode, select Display Setting, press the ENTER button to confirm, use the UP/DOWN
button to select Display Inverse, Backlight Auto Off, Backlight Intensity ,Temperature unit,
Display Warning or Language.
Display Inverse
To select Display Inverse, press the ENTER button to confirm. Use the UP/DOWN button to
select No (normal) or Yes (display inverse). Once selected, press the ENTER button to store. Press
the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Backlight Auto Off
To select Backlight Auto Off, press the ENTER button to confirm. Use the UP/DOWN button
to select No (display always on) or Yes (display goes off one minute after exiting menu mode).
Once selected, press the ENTER button to confirm and store. Press the MENU button back to the
last menu or let the unit idle one minute to exit menu mode.
11G