Graphic Command; Esc+G Graphic Print - SATO WS4 Series Programming Reference Manual

12. Graphic Command

Graphic
Available for
WS4 series

ESC+G Graphic Print

Graphic Print
ESC
Hex code
<1B>
16
Default setting None
When printer is powered off
Persistence of
Validity in a job
the command
Validity after a job
[Function]
Specifies graphic printing.
[Format]
<G>abbbcccn~n
●Parameter
a [Specifies data in hexadecimal/binary]
H: Hexadecimal 8bit data divided into 2 blocks of 4bit and output in a ASCII-based Hexadecimal code.
B: *Binary
b [Width of the graphic area]
c [Height of the graphic area]
n [Graphic data]
[Coding Example]
<A>
<V>50<H>50<G>H02000288888888...8888
<Q>2
<Z>
[Notes]
1. "B" Binary format is advantageous to"H" in terms of total data length being 1/2, though it needs prolix programming.
2. The rotation command<%>, expansion command<L> can be used in combination with this command.
[Valid range]
Model
WS408DT/TT
WS412DT/TT
G
<47>
16
Set parameter will not be retained
Becomes invalid after execution
Becomes invalid after the job
8bit data is handled as 1font data and output in a chunk.
= see table below for valid range
= see table below for valid range
Max. width (byte) Max. height (byte)
104 600
156 400
Parameter
abbbcccn~n
168
ESC+G