Esc+Fw Rule / Grid Print - SATO WS4 Series Programming Reference Manual

Modification
Available for
WS4 series

ESC+FW Rule / Grid Print

Rule / Grid Print
ESC
Hex code
<1B>
16
Default setting None
When printer is powered off
Persistence of
Validity in a job
the command
Validity after a job
[Function]
Prints rule / grid
[Format]
<FW>aabcccc
● Parameter
a [Line width]
b [Horizontal / vertical setting]
c [Length]
<FW>aabbVccccHdddd
● Parameter
a [Vertical line width]
b [Horizontal line width]
c [Vertical line length]
d [Horizontal line length]
[Coding example] Ruled line:
Grid:
<A>
<V>100<H>200<FW>04H400
<V>300<H>200<FW>0808V300H400
<Q>2
<Z>
[Notes]
1. If the print start position is outside of the printable area, it will not print due to a command error.
[Valid range]
Model
WS408DT/TT
WS412DT/TT
FW
<46> <57>
16 16
Set parameter will not be retained
Becomes invalid after execution
Becomes invalid after the job
=
=
=
=
=
=
=
Line width: 4, Horizontal setting, Length: 400
V. line width: 8, H. line width: 8, V. line length: 300, H. line length: 400
Horizontal line length in dots
1 to 832
1 to 1248
ESC+FW
Parameter
Rule aabcccc
Grid aabbVccccHdddd
Rule print
Valid range : 02 to 99 dots
H : Horizontal
V : Vertical
Valid range : Refer to table below
Grid print
Valid range : 02 to 99 dots
Valid range : 02 to 99 dots
Valid range : Refer to table below
Valid range : Refer to table below
Vertical line length in dots
1 to 7992
1 to 11988
23