Esc+A3 Base Reference Point - SATO WS4 Series Programming Reference Manual

System
Available for
WS4 series

ESC+A3 Base Reference Point

Base Reference Point
ESC
Hex code
<1B>
16
Default setting None
When printer is powered off
Persistence of the
Validity in a job
command
Validity after a job
[Function]
Specifies a new base reference point
[Format]
<A3>VabbbbHcdddd
●Parameter
a Plus / Minus sign for vertical position correction
b Vertical position shift (dots)
c Plus / Minus sign for horizontal position correction (omissible)
d Horizontal position shift (dots)
[Coding Example]
<A>
<A3>V10H10
<Z>
[Notes]
1. The new position set outside printable area, will result in no printing.
2. The new position will be applied to all the label formats. Pay attention to it when you run multiple formats.
[Tips]
1. The values set by this command <A3> is not persistent after powering off the printer.
[Valid range]
Model
WS408DT/TT
WS412DT/TT
A3
<41> <33>
16 16
Set parameter will not be retained
Retained until next valid setting
Retained until next valid setting
指定後の基点
New position
Horizontal offset (dots)
-792 to 792
-792 to 792
Parameter
VabbbbHcdddd
= +, - (Omissible)
= 0 to 792 (dots)
= +, - (Omissible)
= 0 to 792 (dots)
Original position
指定前の基点
V
H
Vertical offset (dots)
-792 to 792
-792 to 792
174
ESC+A3