Table of Contents
Advertisement
Integration
8.1 Integration into an automation system
PROFINET IO application
You can create, operate and configure PROFINET IO applications using the "Development
Kit DK-16xx PN IO. It must be installed in addition to the CP 16xx.sys device driver. This kit
and the documentation are available free of charge at the following Internet address:
http://www.automation.siemens.com/net/html_00/produkte/040_cp_1616_devlopkit.htm
SIMATIC NET
You can create, operate and configure SIMATIC installations using this software package.
You will find information on this on the SIMATIC NET Manual Collection CD. This software
package and the documentation are not part of the product package.
Additional information
For further information, refer to the catalog and to the online ordering system of Siemens
A&D.
http://www.mall.automation.siemens.com
56
SIMATIC Box PC 627B
Operating Instructions, 06/2008, A5E00927393-02
Advertisement
Table of Contents
