Table of Contents
Advertisement
8.2
PROFINET
CP 1616 onboard
The basic characteristics of the PCS 1616 onboard are:
● Optimized for PROFINET IO
● With Ethernet realtime ASIC ERTEC 400
● Three RJ45 sockets for connecting terminal devices or addition network components
● Integrated 3-port real-time switch
● Automatic hardware detection
CAUTION
Only one CP 1616 can be installed in a PG/PC. If you want to use an additional CP
1616 module, the "CP 1616 onboard" option must be disabled in the BIOS Setup.
Additional documentation on PROFINET
Get an overview of the information available on the topic of PROFINET.
Document designation
This documentation is not included in the product package:
Getting Started
PROFINET IO Getting Started: Manual
Collection
Manual
PROFINET System Description
Manual
From PROFIBUS DP to PROFINET IO
Readme file for CP 1616/CP 1604 and DK-
16xx PN IO
Configuration Manual
Commissioning PC Stations
Manual
SIMATIC NET Industrial Communication
with PG/PC: Volume 1 - Basics
SIMATIC NET Industrial Communication
with PG/PC: Volume 2 - Interfaces
S7 CPs for Industrial Ethernet
Configuring and Commissioning
SIMATIC Box PC 627B
Operating Instructions, 06/2008, A5E00927393-02
What is contained in this document?
The documents use concrete examples to provide
step-by-step instructions on how to commission a fully
functional application.
This gives you the basic knowledge about the
PROFINET IO topics:
Network components, data exchange and
communication, PROFINET IO, component-based
automation, application example of PROFINET IO and
component-based automation.
Read this document if you want to convert an installed
PROFIBUS system to a PROFINET system.
This provides the latest information about the
SIMATIC NET products CP 1616/CP 1604, CP 1616
onboard, the developer kit.
This provides you will all the information necessary for
commissioning and configuring a PC as a PROFINET
IO controller or IO device.
This manual introduces you to industrial
communication and explains the available
communication protocols. It also describes the OPC
interface as an alternative to the IO-based user
programming interface.
This provides the following support:
- For commissioning S7 stations
- For establishing effective communication
Integration
8.2 PROFINET
57
Advertisement
Table of Contents
