Installing/Removing A Drive Bay Module - Siemens SIMATIC 627B Operating Instructions Manual

Expansions and programming
10.4 Installing drives
10.4.2

Installing/removing a drive bay module

Preparations
Isolate the device from mains and disconnect all connection cables.
Removing a drive bay module for hard disks and optical drives
Steps for removing the drive bay
1 Loosen the four screws (1).
2 Lift out the drive bay module for
hard disks and the optical drive.
74
SIMATIC Box PC 627B
Operating Instructions, 06/2008, A5E00927393-02