Table of Contents
Advertisement
11.1.4
Removing/Installing the Power Supply
WARNING
Only authorized trained personnel are allowed to replace the power supply unit.
Preparations
1. Isolate the device from mains and disconnect all connection cables.
2. Open the device.
Removing the power supply unit
How to remove the power supply module
1
Remove the drive bay module for the hard disk and DVD burner.
2
Loosen the screws (1) and remove
the power supply cover.
3
Remove the screws (1) (Torx T10).
SIMATIC Box PC 627B
Operating Instructions, 06/2008, A5E00927393-02
11.1 Removing and installing hardware components
Maintenance and service
89
Advertisement
Table of Contents
