Advertisement
13) Click on the "Specification" Tab. Then, fill-out the patient information using the
numbers and other information as shown below:
-click "Yes" for co-contraction ability
-choose either "man" or "woman"
-choose "left" or "right"
-click on "Socket" and make any choice in
orange box
14) Now that you've set up a mock patient; click on the "Component Selection" Tab.
Click on the two electrodes, Click on the 10S4=9E169 wrist, and Click on
the SensorHand Speed and choose program 1 from the drop down arrow (if necessary)
(If the patient has a wrist rotator, click on 10S17+13E205 box)
he
Advertisement
