Otto Bock PAULA Manual page 2

Step 2: Connect the laptop to the MyoBoy Hardware
Grounding Cable
USB Cable
1) Connect the USB cable to the MyoBoy and plug USB end into the laptop
2) Connect the Grounding Cable to the MyoBoy
3) Connect the Electrode Adapter to the MyoBoy and carefully tighten the finger screws
4) Connect the electrodes into port I and II on the Electrode Adapter
Port I
Figure 4: Electrode Adapter
Carrying Case
2 electrodes
Electrode
Adapter
Port II
Figure 5: Complete Set up
Figure 3: MyoBoy components
Short
Instruction
Guide
MyoBoy
Screw
Driver