Advertisement
12) Click the "Start" button and electrode signals will now be visible on the MyoTest screen.
You may begin your evaluation. Remember:
If you would like to jump ahead to only playing the game and using the simulation tab, you may
skip to the MyoSimulation tab now. However, you would like to use the Virtual Simulation of
the componentry, you must fill out the Specification and Component Selection tabs:
10) Turn on the
MyoBoy by pressing
the "On" button on
the front. The light
bars on the left will
briefly illuminate, and
a solid red light will
illuminate above the
on button. A flashing
red light indicates the
9 volt battery needs
replacement
11) When the MyoBoy is
turned on and correctly
connected to the laptop,
the symbol in the lower
right corner of the myotest
screen will turn blue;
indicating the system is
operational. A flashing red
symbol indicates the
connection has not been
made; recheck the system
and all connections
Blue=Flexors
and
Red=Extensors
Advertisement
