Table of Contents
Advertisement
5. Set-Up
a. Connect
i. The TF 1500 comes configured for internal or external air. Select air
N
Key
2
Figure 2a
ii. Insert PC into brackets on back of PC.
iii. Monitor
iv. Keyboard – connect cable to computer.
v. Mouse – connect cable to computer.
vi. Connect cables between PC and back of TF 1500 according to labels.
vii. Connect power cords to TF 1500 and PC.
b. Start up
i. Turn on circuit breaker on back of unit.
ii. Turn on power switch on front of unit.
iii. Turn on computer.
iv. Turn on monitor.
v. Mouse click on TF 1500 icon.
vi. Read and accept license.
www.paceworldwide.com
source; internal pump or external N
Warning: Do not run unit in N
on.
1. Open rear panel.
2. Turn key to desired air supply.
3. Close rear panel.
4. Connect power cord.
5. Connect video cable to the 9-pin connector of the PC.
System Operations Manual
. (Figure 2a & 2b)
2
mode unless N
supply is connected and
2
2
N
Connection
2
Figure 2b
Page 7 of 38
Advertisement
Table of Contents
