Pace TF 1500 Operation And Maintenance Manual page 32

System Operations Manual
9. Inside the back of the TF 1500, locate
the 2 sensor wires, cut the ties and
disconnect them. DO NOT CUT THE
WIRES. Pull these 2 wires thru to the
front. Identify and mark the wires so they
are not reversed.
10. Remove the 4 screws holding the
heater to its mount, one on each corner.
11. Carefully lower heater off the vacuum
shaft. Make sure as it is lowered that it is
free of hoses and wires.
www.paceworldwide.com Page 31 of 38