Table of Contents
Advertisement
7. Temperature Control
8.
9.
pump filter housing
screw
www.paceworldwide.com
a. Heater temperatures are adjusted by changing the numbers on the profile screen
by clicking on the arrows, moving the temperature bars or using the up and down
arrows on the keyboard. (See paragraph 6.c.ii.)
Available Nozzles/Accessories/Optional Items
a. A complete list of nozzles and accessories is on our web site,
paceworldwide.com
Maintenance
Caution: Disconnect the main power supply and computer cables before
opening the TF 1500 door, replacing any component or before performing any
routine maintenance.
a. Cleaning the Blower Filter. Clean the filter every three months.
i. Open the cover on the back of the TF 1500. (Figure 21)
ii. Identify the blower pump, mounted on the base of the machine.
iii. Loosen the screw fitted to the end of the filter housing.
iv. Remove the housing, then the filter.
v. Clean the filter using warm water.
vi. Make sure the filter is dry before reassembly.
b. Periodically inspect the power cords and other cables for signs of wear or
damage. If wear or damage is found, replace the cord or cable immediately.
c. The work surface and housing should be cleaned periodically with a soft damp
cloth.
d. The camera glass window should be cleaned periodically with glass cleaner and
a soft cloth.
e. Maintenance beyond this should only be completed by a qualified PACE service
technician.
Figure 21
System Operations Manual
Page 25 of 38
Advertisement
Table of Contents
