Table of Contents
Advertisement
ii.
With the camera pulled out, loosen the two screws on the top right of the
camera.
iii. Reposition the camera until the front and back edges are centered in the viewing
window and tighten the screws.
f.
If the nozzle edges are off right to left:
i.
Open the back of the TF 1500. WARNING: DO NOT TOUCH LIVE CIRCUITS!
ii.
In front, loosen the screw protruding under the camera housing.
www.paceworldwide.com
System Operations Manual
Page 36 of 38
Advertisement
Table of Contents
