Table of Contents
Advertisement
f.
i
ii
iii
www.paceworldwide.com
Alignment Screen Features (Figure 5)
i. Component/PCB alignment image. Proper alignment is viewed here
showing the PCB pads (blue) directly under the component pads (red).
ii. Zoom bar. The image can be zoomed in or out using this bar or the up
and down arrows on the keyboard.
iii. Focus bar. The image can be manually focused using the slider on this
bar or it can be automatically focused by checking the box by 'auto'.
iv. Instructions. Follow these instructions to proceed through the alignment
sequence.
v. Screen options.
1. Edit – Change Instructions.
2. Cancel – Cancel changes made to instructions.
3. Save – Save changes made to instructions.
4. Reset – Returns to factory set instructions.
vi. Full Screen. Click on here to view image full screen.
vii. Nozzle step adjustment. If component (red) cannot be aligned to PCB
(blue) or you cannot focus, adjust nozzle height up or down with this
option until better alignment or focus is achieved.
Figure 5
System Operations Manual
Page 11 of 38
iv
v
vi
vii
Advertisement
Table of Contents
