Table of Contents
Advertisement
iii. Sensor Indicators. Indicates real-time temperature of thermocouples in
iv. Trial Run Window. Indicates which trial runs are showing on the graph.
v. Clear Trial Run Selector. Clears the checked trial runs when clicked.
vi. Profile Status Bar. Indicates the current status of a running profile.
vii. Status Bar. Same as production screen.
viii. Profile Name. Indicates current selected profile.
ix. Options.
x. Profile Instructions. Insert instructions for the operator.
xi. Cycle Start Button. Start the selected profile.
xii. Mode. Select whether this is to be an installation or removal profile.
xiii. Flux Dip Option Selector. Select whether this option will be used.
xiv.
xv.
xvi. Sequencing Button. Click here to proceed to next step in the operation.
xvii. Nozzle Steps Indicator. Indicates the number of steps the head is
xviii. Fan On/Off Button. Manual on/off switch for the cooling fan.
www.paceworldwide.com
use.
There can only be three trial runs saved in this window.
1. New – clears all settings
2. Open – opens a profile saved on the computer
3. Save – saves profile to file name showing in the profile name
window
4. Save as – saves profile to new file name
5. Print – prints current settings
6. Export – saves profile as a spreadsheet file
Home Button. Aborts the profile when clicked and returns to the
beginning screen.
Nozzle Head Position Selector. When the reflow head lowers
automatically, it stops above the PCB. Use this to lower the PCB flush to
the PCB. The number of steps it is lowered is indicated in the window
below the buttons. This number is saved for operation.
lowered by the nozzle head buttons.
System Operations Manual
Page 14 of 38
Advertisement
Table of Contents
