Table of Contents
Advertisement
G. Optics Housing
H. Bottom Side Heater
I.
Board Holder
J.
On / Off Switch
K. Mouse
L. Emergency Off Switch
3. Safety Information
a. Do not contact the Heater or its peripheral parts during operation.
b. Once turned off, let the unit cool completely before contacting.
c. When using fluxes, use fume extraction equipment or use in a well-ventilated
area to minimize operator exposure to fumes.
d. Do not use near combustible vapors.
e. Do not leave the equipment unattended when in use.
f.
Do not open rear panel without disconnecting power cable.
4. Features
a. The TF 1500 is ideal for post assembly rework, repair, and low volume/short run
production operations. The TF 1500 can remove and install PBGAs, CSPs, FCs,
LGAs, LCC's and other SMDs.
b. Featuring unparalleled thermal performance, The TF 1500's flexibility and state
of the art process software means no other system is easier to use. The TF 1500
is a PC driven, semi-automated system that requires a Pentium ® 4 PC featuring
Windows XP® Professional OS. The unique standard software package offers
much more than just an operator interface. TF 1500's advanced vision and
placement system is highly accurate and can quickly magnify even the smallest
components for easy alignment. TF 1500 uses a combination of convective top
heating coupled with powerful IR bottom heating for an effective, repeatable
heating process.
c. Economical and easy to use, the TF1500 Rework System delivers high-end
BGA/CSP functionality, moving far beyond expensive, bulky rework machines by
offering unparalleled performance at an affordable price.
d. REFLOW FUNCTION
i. Unequalled programmability and process control ensures successful,
ii. The powerful and responsive 1600 Watt top heater, with closed loop
www.paceworldwide.com
Contains the camera and beam splitter (prism). The
housing is retractable and should be kept in the retracted
position when not in use. The lights for the optics will
turn on/off automatically when the housing is
extended/retracted.
Used to warm the PCB from the underside. It is an IR
type heating source.
The board holder is fully adjustable in the X direction
only. Fine adjustment of both the X and Y direction is
achieved by using the adjusting knobs on the end of the
holder for X and on the front of the machine for Y.
The right side of the holder is spring loaded to hold the
PCB securely.
Used to turn the system on or off. When turning off the
system, always turn off the PC using the windows
interface first.
Used to enter information into software.
In case an emergency shut down is necessary, press
this button.
repeatable installation.
temperature control, coupled with proven TF 3000 nozzle design ensures
uniform temperature distribution when heating.
System Operations Manual
Page 5 of 38
Advertisement
Table of Contents
