Table of Contents
Advertisement
i
ii
iii
iv
v
vi
www.paceworldwide.com
ix. Operator's Comments. Provides a space for the operator to write
comments.
x. Options. Save to save operator's comments and reset to clear screen.
xi. Mode. Indicates whether this is an installation or removal profile.
xii. Flux Dip Option. Indicates if the Flux Dip option is selected.
xiii. Abort Button. Click at any time to abort the process and return to the
beginning.
xiv.
Sequencing Button. Click here to proceed to next step in the operation.
xv.
Nozzle Step Indicator. Indicates how many steps the nozzle will lower to
properly position itself for operation.
xvi. Fan On/Off Selector. Manual on/off switch for the cooling fan.
h. Profile Development Screen Features (Figure 7)
i. Temperature and Time Settings. Used to indicate and set the
temperatures and times for the profile.
ii. Graph. Draws a trace graph of temperatures measured by
thermocouples. Colored bars indicate the times and temperatures
selected in the settings. Times and temperatures can be changed before
and during a profile by dragging these lines to a different setting.
1. red – top heater
2. brown – bottom heater
3. purple – time dividing lines between zones
4. yellow – reference lines set in the setup screen
Figure 7
System Operations Manual
Page 13 of 38
vii
viii
ix
x
xi
xii
xiii
xiv
xv
xvi
xvii
xviii
Advertisement
Table of Contents
