Pace TF 1500 Operation And Maintenance Manual page 22

x.
xi.
xii.
xiii.
Flux
Dip
Tray
www.paceworldwide.com
Figure 17a
Mouse click on the green button. TF 1500 will pick up component.
Remove component mount from the top of the camera housing.
If Flux Dip option was selected, place the flux dip assembly on top of
the camera housing. (Figure 17b) Mouse click to dip, then remove flux
dip assembly.
Mouse click on the green button again to switch to the alignment
screen and lower component to focus point. (Figure 5)
Figure 17b
System Operations Manual
Component
Page 21 of 38