Table of Contents
Advertisement
i
ii
iii
iv
v
vi
www.paceworldwide.com
g. Production Screen Features (Figure 6)
i. Profile Indicator. Indicates currently selected profile. A new profile can
be selected from a list of saved profiles by clicking on the arrow.
ii. Profile Instructions. Instructions entered by the developer can be viewed
here.
iii. Temperature and time settings. Settings for the profile are indicated
here.
iv. Sensor indicators. Real-time sensor readings can be viewed here if
thermocouples are used.
v. Graph. A saved graph and, if thermocouples are used, an active trace
graph are viewed here.
vi. Profile Status Bar. Indicates the current status of a running profile.
vii. Heater Button. Used to turn the heater back on after the machine has
been in setback. Blinks red if in setback and must be selected to
continue sequence.
viii. Status Bar.
1. System status – shows if system is 'normal', in 'setback' or
'shutdown'.
2. Heater status – Shows 'ready' if bottom heater is in range.
Shows 'not ready' if bottom heater is not in range. The software
will not continue until it is in 'ready' status.
3. Bottom heater temperature – Shows real time bottom heater
temperature.
Figure 6
System Operations Manual
Page 12 of 38
vii
viii
ix
x
xi
xii
xiii
xiv
xv
xvi
Advertisement
Table of Contents
