Table of Contents
Advertisement
•
Protect your table and
accessories with sheets and
fleeces. We offer both fitted
sheets and thick fleeces that
protect your upholstery
fabric against oil stains
while offering comfortable
softness to your clients.
You can also preserve your
face rest and bolsters with
covers and fleeces.
PRODUCT IDENTIFICATION
BASE & CONTROLS
•
Use only a mild solution of 4:1 diluted non-alcohol cleaner such as 409
or some other non-abrasive cleaner to wipe down the metal and wooden surfaces.
Apply with a damp (not wet) lint-free cloth. Be sure excess liquid does not drip onto,
or into, any of the electrical controls or mechanisms. Be sure that the unit is
unplugged before cleaning these areas. Wipe these areas dry carefully with a lint free
cloth.
•
Electronic and/or manual lift mechanisms require no general maintenance or
lubrication. Hydraulic units may require yearly maintenance.
•
If the table will be out of use for an extended period of time, the power cord should
be unplugged from the receptacle. To prevent inadvertent damage to the plug or
cord, the cable should be coiled and secured with a wire tie or rubber band.
•
The wooden cabinetry of the equipment can be polished with any polish approved
for wooden surfaces. Spray, or pour the polish onto a soft cloth and be careful not
to get it onto other surfaces.
•
It is important to visually inspect your table on a quarterly basis to ensure all
components are working properly and safely. Be sure to tighten all bolts to be sure
they are secure. Over time they may work their way loose, leading to an unsafe
condition.
•
ACCESSORIES
•
These items should be stored in a cool, dry place.
POWER LEAD PLUGS
Part #:
O
®
akworks
7791
7791-03
7791-04
The
face
rest
extender
should be
in
use.
Voltage (ACE)
Power Cord Plug
120v 60 Hz
3 prong grounded
North America
220v 50 Hz
Continental Plug;
Europe/Italy
220v 50 Hz
Swiss plug; Switzerland
, Fantastik
®
®
and
table
removed when
not
12
Advertisement
Table of Contents
