Teaching-In - HomeMatic HM-LC-Dim1T-FM Installation And Operating Manual

Radio-controlled dimming actuator 1-channel trailing edge flush-mount
Hide thumbs Also See for HM-LC-Dim1T-FM:
Table of Contents

Advertisement

Available languages

Available languages

- If a long pushbutton press occurs after these
5 minutes, dimming takes place. The dimming
direction changes with each pushbutton press.

7.2 Teaching-in

Please read this entire section before starting the
teach-in procedure.
To execute the teach-in procedure, both of the
devices to be linked must be in teach-in mode.
The actuator does not have a special teach-in
button. To teach in the actuator, connect a suitable
voltage-stable pushbutton to the pushbutton input
(see Installation section). To teach in the actuator,
press and hold down the pushbutton for about 4
seconds within the first 5 minutes of switching on
the mains voltage.
The device LED will flash continuously to indicate
that teach-in mode is active.
If no teach-in operations are carried out, teach-in
mode will be exited automatically after 20 seconds.
If other devices are also in teach-in mode, they will
be taught-in.
31

Advertisement

Chapters

Table of Contents
loading

Table of Contents