Table of Contents
Advertisement
Available languages
Available languages
Permitted cable cross sections for connecting to the
flush-mounted actuator:
Rigid cable
[mm
]
2
0.20 – 1.50
7
Start-up
7.1 Simple operator functions using
connected pushbutton
The actuator can be operated immediately using
an external pushbutton (no teach-in required) for
checking that the electrical installation is correct.
Existing pushbuttons can continue to be used.
A short press of the pushbutton switches the load
on and off. A long press of the pushbutton has two
functions:
- If this occurs within the first 5 minutes of switching
on the mains voltage, teach-in mode is activated.
30
Flexible cable
without
ferrule
[mm
]
2
0.20 - 1.50
Flexible cable
with
ferrule
[mm
]
2
0.25 – 0.75
Advertisement
Chapters
Table of Contents
