Installation - HomeMatic HM-LC-Dim1T-FM Installation And Operating Manual

Interference can also be caused by switching
operations, electrical motors or defective electrical
devices.
The range of transmission within buildings
can deviate greatly from open air distances.
Besides the transmitting power and
the reception characteristics of the receiver,
environmental factors such as humidity in the
vicinity have an important role to play, as do on-site
structural/screening conditions.
eQ-3 Entwicklung GmbH hereby declares that this
device conforms with the essential requirements
and other relevant regulations of Directive
1999/5/EC.
The full declaration of conformity is provided at
www.HomeMatic.com.
6

Installation

The actuator for flush mounting is suitable for
concealed installation in installation boxes.
If a number of flush-mounted actuators are to
be installed in installation boxes located next
to or above one another (connected or not
connected), the total switched current must
27