Separating Motor And Gearbox - Fein BSS 2.0E Repair Instructions

BSS 2.0E
6. Disassembly

Separating motor and gearbox

3
1
2
1. Remove the two cylinder head screws (1).
2. Remove the housing (2) together with the adapter (3).
3. Remove the four screws (4) on the intermediate flange.
4. Remove the armature with intermediate flange (5).
5. Remove the air guide ring (6).
C-SC_CSSM Version 1.0
4
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
5
6
.
Tool:
- 4mm hex key
- Torx T15
Page 9 of 36