BSS 2.0E
7. Assembly
Assembling the tool head
1
1. Insert the spiral spring (1).
2. Position the plate (2) on the spiral spring and secure it with the four screws.
3. Fill the adapter (3) with 8g of grease.
4. Attach the adapter (3) to the housing and secure it with the three cylinder head screws (4).
C-SC_CSSM
Version 1.0
2
3
4
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Tool:
- Torx T10
- 2mm; 3mm hex key
- Grease 0 40 101 0100 4
Page 25 of 36