Fein BSS 2.0E Repair Instructions page 29

BSS 2.0E
7. Assembly
Assembling the stator
1
1. Connect the four cables (1) to the stator, as shown in the first image.
 Mind the cable length when connecting.
2. Insert the cables into the inside of the stator (2).
3. Install the stator, as shown in the third image.
 Assemble the stator so that the identification number is located on the side of the slide switch.
C-SC_CSSM Version 1.0 2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
2
.
Tool:
- Hook
Page 29 of 36