Assembling The Tool Head - Fein BSS 2.0E Repair Instructions

BSS 2.0E
7. Assembly

Assembling the tool head

1
2
1. Secure the two cutting jaws (1) with the four screws (2).
 The tip of the respective cutting jaw should be pointing in the working direction.
2. Insert the hand guard (3).
3. Install the set screw (4) and the cylinder head screw (5).
4. Set the cutting jaw distance (1) to 5.3 mm using the set screw (4).
5. Tighten the cylinder head screw (5).
C-SC_CSSM Version 1.0
3
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
4
.
5
5.3mm
Tool:
- Torx T15
- 2.5mm; 3mm hex key
Page 22 of 36