Assembling The Eccentric Shaft - Fein BSS 2.0E Repair Instructions

BSS 2.0E
7. Assembly

Assembling the eccentric shaft

1
2
1. Press the ball bearing (2) onto the eccentric shaft (1).
2. Press the bush (3) onto the eccentric shaft using the gear-wheel (4).
3. Remove the gear-wheel (4) by hand.
4. Place the feather key (5) onto the eccentric shaft.
5. Slide the cover (6) onto the eccentric shaft, as shown in the image.
6. Press the gear-wheel (5) onto the eccentric shaft.
C-SC_CSSM Version 1.0
3
4
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
5
.
6
5
Tool:
- Arbor press
- Sleeve with ø12mm
interior
Page 20 of 36