Assembling The Electronics - Fein BSS 2.0E Repair Instructions

BSS 2.0E
7. Assembly

Assembling the electronics

1. Connect the motor cables and the cable with the plug to the electronics (1).
2. Insert the electronics into the housing (2).
 Ensure that the switch engages in the control rod.
3. Screw down the fit strain relief (3) [0.6 ± 0.05Nm].
C-SC_CSSM Version 1.0
1
3
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
2
.
Tool:
- Phillips head screwdriver
- Torx T15
Page 33 of 36