BSS 2.0E
7. Assembly
Assembling the tool head
1. Check the distance between the cutting jaws and the cutter blade.
If necessary, repeat work steps four and five on page 22.
2. Position the discs (1) on both sides.
3. Secure the blade bolts with the two circlips (2) on both sides.
C-SC_CSSM
Version 1.0
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
2
1
.
Tool:
- Feeler gauge
- Circlip pliers
Page 24 of 36