BSS 2.0E
6. Disassembly
Disassembling the armature and Intermediate bearing
1
1. Push the armature (1) out of the intermediate bearing.
2. Remove the gearbox shaft (2) from the intermediate bearing using a mallet.
3. Remove the grooved ball bearing (3) from the intermediate bearing.
4. Pull off grooved ball bearing (4).
5. Remove the grooved ball bearing (5) with the sealing ring (6).
C-SC_CSSM
Version 1.0
2
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
3
4
.
5
6
Tool:
- Arbor press
- ø 5.9mm punch
- Sleeve with ø 55mm
interior
- Plastic mallet
- Slide hammer
- 8-12mm internal puller
- 26mm, 19mm chuck
cone
- Drawing-off socket cap
Page 12 of 36