Disassembling The Eccentric Shaft - Fein BSS 2.0E Repair Instructions

BSS 2.0E
6. Disassembly

Disassembling the eccentric shaft

1
2
3
1. Remove the circlip (1).
2. Using a pull-off tool, remove the gear-wheel (2).
3. Remove the cover (3).
4. Remove the feather key (4).
5. Remove the grooved ball bearings (5) from the eccentric shaft together with the sleeve (6).
C-SC_CSSM Version 1.0
4
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
6
5
.
Tool:
- Circlip pliers
- 60x50mm puller
- Arbor press
- ø6.8mm pressure piece
Page 19 of 36