Table of Contents
Advertisement
4.4. Removing the gearbox
Place gearbox housing on intermediate bearing.
Remove upper circlip.
Remove all components, including the two balls.
Rotate drill shaft until the wrench flat provides good access for removing the circlip.
Remove circlip in gearbox housing.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
FEIN REPAIR TOOLS
C-SC_CSSM
2012.05
Tool:
- Longsleeve Circlip, angled
- External circlip pliers
Advertisement
Table of Contents
