Disassembling The Gearbox - Fein BSS 2.0E Repair Instructions

BSS 2.0E
6. Disassembly

Disassembling the gearbox

1
1. Unscrew the three screws (1) and remove the adapter (2).
2. Press out the needle bearing (3).
CAUTION!
Risk of injury due to tensioned spiral spring.
 Hold the plate (5) when loosening the screws (4).
3. Remove the four screws (3).
4. Remove the plate (5) and the spiral spring.
5. Remove the set screws (6) on both sides.
C-SC_CSSM Version 1.0
2
3
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
5
6
4
.
Tool:
- 2mm; 3mm hex key
- Pressure piece ø 11mm
- Torx T10
- Plastic mallet
Page 14 of 36