Nordson AltaBlueA4TP Customer Product Manual page 57

Second
First Digit
Digit
P
(Parameter)
S
(Setpoint)
E 2014 Nordson Corporation
Table 3‐6 Change History Log
Indicates the number of the parameter that was changed
Are used in conjunction with the LEDs on the component keys to indicate the
location and method of a setpoint temperature change.
When this LED is
on..
Tank Key
-
Hose Key
Gun Key
All Keys
Hose Key
Gun Key
Change History Log Examples
Example 1:
Example 2:
If the LED on the gun key is on, then this display would
indicate that the global‐by‐component method was used to change the
temperature of the guns.
Unused log entries in the change history log are
indicated by "P-_" in the right display.
To view how many heater hours have elapsed
since a specific change (displayed) was made,
simultaneously press both of the right-display
scroll keys.
Third and Fourth Digits
And the Fourth The change was
Digit Indicates.. to..
1 The tank
1– 6 A single hose
1– 6 A single gun
0 All components
0 All hoses
0 All guns
Parameter 4 (ready delay) was changed.
3-29
Installation
And the Method
of Change was..
Individual
Individual
Individual
Global
Global‐by‐
component
Global‐by‐
component
Part 1107600_03