Nordson AltaBlueA4TP Customer Product Manual page 237

E 2014 Nordson Corporation
Operating Parameters
Operating parameters are organized in this appendix according to the logical
groups listed in Table B‐1. For information about selecting and editing
operating parameters, refer to Section 3, Installation, Setting Up the Melter.
NOTE: Parameter numbers that are reserved or that are not used do not
appear in this appendix.
Table B‐1 Parameter Groups
Parameter
Group
Numbers
0 to 8 and
Standard
10 to 14
Pressure Control 15 to 17
Temperature Control 20 to 29
Input Setup 34 to 39
Output Setup 42 to 46
Seven-day Clock 50 to 77
Automatic Fill Timer 78
PID Selection 80 to 91
Operating Parameters
Appendix
Group Description
Frequently used parameters
Configure pressure settings
Control heater function
Configure the standard and optional inputs
Configure the standard and optional outputs
Configure the clock feature
Configure the external motor control switch
Configure the PID settings
B-1
B
Part 1107600_03