Motor Connections; Brushless Motor Connection; 2-Phase Step Motor Connection - Technosoft iMOTIONCUBE BX-CAN Technical Reference

3.5.7

Motor connections

3.5.7.1

Brushless Motor connection

Remark: In case J7 (Earth) is not present, connect the Shield (if present) to GND instead.
3.5.7.2

2-phase Step Motor connection

Remark: In case J7 (Earth) is not present, connect the Shield (if present) to GND instead.
 Technosoft 2019
Figure 3.15. Brushless motor connection
Figure 3.16. 2-phase step motor connection, one coil per phase
Figure 3.17. 2-phase step motor connection, two coils per phase
27 iMOTIONCUBE Technical Reference