3.2.1
iMOTIONCUBE CAN PCB Footprint
For iMOTIONCUBE CAN motherboard PCB design, use the dimensional drawing from
file or at support@technosoftmotion.com.
All dimensions are in mm. Holes are marked with RED.
*
J7 is not available on previous versions of iMOTIONCUBE v2.0.
3.2.2
iMOTIONCUBE CAN-STO PCB Footprint
For iMOTIONCUBE CAN-STO motherboard PCB design, use the dimensional drawing from
a .dxf file at support@technosoftmotion.com.
All dimensions are in mm. Holes are marked with RED.
Technosoft 2019
Figure 3.2 iMOTIONCUBE CAN PCB Footprint
Figure 3.3 iMOTIONCUBE CAN-STO PCB Footprint
15
below or request a .dxf
Figure 3.2
below or request
Figure 3.3
iMOTIONCUBE Technical Reference