Table of Contents
Advertisement
Frequently asked questions
Cleaning the water inlet filter
A filter is incorporated in the screw connec-
tion to protect the water intake valve. If the
filter is soiled, insufficient water flows into
the wash cabinet.
Risk of electric shock from voltage.
The plastic housing of the water connec-
tion contains an electrical valve.
The housing must not be dipped in water.
Disconnect the dishwasher from the
power supply.
To do this, turn off the dishwasher and
disconnect the electrical plug.
Close the faucet.
Unscrew the water intake valve.
Take the seal ring out of the screw con-
nection.
Using needle-nose pliers, take hold of the
plastic filter bar and pull it through the fil-
ter.
Rinse the filter under running water.
Re-assemble in reverse order.
Screw the screw connection securely
back onto the faucet. Slowly open the
faucet. If water drips out, tighten the con-
nection.
Never forget to put the filter back in place
after cleaning.
94
Advertisement
Table of Contents
