Setting The Wash Block Temperature - Miele PG 8593 Operating Instructions Manual

Setting the wash
block
temperature
The wash block temperature is reached by heating up the chamber
wash solution. The temperature must be suited to the requirements of
the task.
At temperatures over 131°F (55°C), protein denaturing occurs,
which can cause the soiling to fix.
...
Wash block temperature

Without heater
-
The chamber wash solution is not heated up. The temperature in
the wash cabinet is the result of the temperature of the previous
wash block and the influx of water.
Set
-
Set a wash block temperature.
Select an option using the  and  arrow buttons.

Press OK to save the setting.

Set
When is selected, the wash block temperature must then be
entered.
Adjustment is in increments of 1. The possible range is shown in the
bottom line.
Dispensing of process chemicals occurs at a default dispensing
temperature set at the factory. If process chemicals are to be
dispensed in this wash block, the lowest temperature that can be set
will be the dispensing temperature. It is not possible to set a lower
value.
Use the arrow buttons  (higher) and  (lower) to set the wash

block temperature.
Press OK to save the setting.

Wash block temp.
Without heater
Set
Wash block temp.
60 °C
(30 - 93 °C)
Program settings
111