Table of Contents
Advertisement
Problem
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The lamp does not oper‐
ate.
The display shows F111.
The display shows an error
code that is not in this ta‐
ble.
Steam and condensation
settle on the food and in
the cavity of the oven.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
Possible cause
The necessary settings are
not set.
The automatic switch-off is
on.
The Child Lock is on.
The door is not closed cor‐
rectly.
The fuse is blown.
The lamp is defective.
The plug of the core tem‐
perature sensor is not cor‐
rectly installed into the
socket.
There is an electrical fault.
You left the dish in the
oven for too long.
The demo mode is activa‐
ted.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
ENGLISH
Remedy
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Fully close the door.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
Replace the lamp.
Put the plug of the core
temperature sensor as far
as possible into the socket.
• Turn off the oven with
the house fuse or the
safety switch in the fuse
box and turn it on again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
Refer to "Basic Settings" in
"Daily use" chapter.
39
Advertisement
Table of Contents
