Table of Contents
Advertisement
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories
before the first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 First Connection
When you connect the oven to the mains
or after the power cut, you have to set
the language, the display contrast, the
display brightness and the time of the
day.
1. Press
2. Press
5.3 Calibration
For the best results with the function:
Auto Cooking, you must calibrate the
appliance. The calibration time is 4
hours.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Navigating the menus
1. Turn on the oven.
2. Press
option.
3. Press
accept the setting.
At each point you can go
back to the main menu with
or
to set the value.
to confirm.
or
to select the menu
to move to the submenu or
.
If you use manual cooking
only, you can ignore this
procedure.
Conditions:
• The temperature in the kitchen must
be below 35 °C.
• Install the appliance in its permanent
location.
• Connect the appliance to the mains
supply and do not disconnect it again.
• If you change the appliance location
or electrical connection, you must do
the steps again.
Calibration:
1. Activate the appliance.
2. Select the menu: Basic Settings and
press OK.
3. Select the function: Calibration and
press OK.
When you calibrate for the
first time, to start the
procedure you can set the
category from the control
panel or select the function
from the main menu: Auto
Cooking.
CAUTION!
Make sure that the appliance
is cool before you use it.
6.2 The menus in overview
Main menu
Symbol / Menu
Application
item
Contains a list of
heating functions.
Heating Func‐
tions
Contains a list of au‐
tomatic categories.
Auto Cooking
Pyrolytic cleaning.
Pyrolysis
ENGLISH
11
Advertisement
Table of Contents
