Table of Contents
Advertisement
Extension. The iAMT H/W is always enabled. Configuration options: [Enabled]
[Disabled]
3.3.8
PCH-FW Configuration
Firmware Update Configuration
Me FW Image Re-Flash [Disabled]
Enables or disables Me FW Image Re-Flash function. Configuration options:
[Enabled] [Disabled]
3.3.9
Power Management
Power Mode [ATX Type]
Select power supply mode. Configuration options: [ATX Type] [AT Type]
Power Saving (ERP) Control [Disabled]
Enables or disables ERP power saving function. Configuration options: [Enabled]
[Disabled]
Restore AC Power Loss [Last State]
[Power Off]
[Power On]
[Last State]
RTC wake system from S5 [Disabled]
[Disabled]
[Fixed Time]
[Dynamic Time]
The following items appear when Fixed Time is enabled.
Wake up day/hour/minute/second [0]
Specify the values for day/hour/minute/second.
The following items appear when Wake System with Dynamic Time is
enabled.
Wake up minute increase [1]
Specify the number of minutes added to the current time before waking up
system.
3-10
The system goes into off state after an AC power loss.
The system goes into on state after an AC power loss.
The system goes into either off or on state, whatever the
system state was before the AC power loss.
Disables system wake up from S5.
The system will wake up at the specified hr::min::sec.
Configuration options: [Disabled] [Enabled] .
The system will wake up at the current time plus a specified
number of minutes.
EMB-Q170B
Advertisement
Table of Contents
