Table of Contents
Advertisement
3.3.6
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Not Present if no SATA device is installed to
the corresponding SATA port.
SATA Controller(s) [Enabled]
Allows you to enable or disable the SATA device(s).
[Enabled]
[Disabled]
3.3.7
PCH-FW Configuration
Allows you to configure the Management Engine Technology parameters.
3.3.8
AMT Configuration
The items in this menu allow you to change the Intel
Technology (AMT) feature.
Intel
AMT [Enabled]
®
Allow you to enable or disable the Intel
the BIOS extension. Configuration options: [Enabled] [Disabled]
•
•
Un-Configure ME [Disabled]
Sets this item to [Disabled] to unconfigure AMT/ME without using a password or
set it to [Enabled] to use a password. Configuration options: [Enabled] [Disabled]
3.3.9
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
3-6
Enables the SATA device(s).
Disables this SATA device(s).
iAMT H/W is always enabled. This option just controls the BIOS extension
execution. If enabled, this requires additional firmware in the SPI device.
The following two items become configurable only when you set the
Intel
AMT item to [Enabled].
®
Enables the support for USB devices on legacy
operating systems (OS).
The USB devices can be used only for the BIOS setup
program.
Active Management
®
Active Management Technology (AMT) in
®
EMB-H81B
Advertisement
Table of Contents
