Table of Contents
Advertisement
9.
USB 2.0 connector (10-1 pin USB_56, USB_78 and USB_910)
These USB connectors comply with USB 2.0 specifications.
EMB-Q170B USB2.0 connectors
Never connect a 1394 cable to the USB connector. Doing so will damage the
motherboard.
NOTES:
•
The USB module cable is purchased separately.
•
Before you install Windows 7 operating system, go to BIOS Setup >
Advanced > XHCI mode [Disabled], USB 2.0 (EHCI) support [Enabled],
and set them back when you finish installing the operating system.
•
Intel(R) has released an official Windows(R) 7 XHCI Driver Creator
Utility, please download it from: https://downloadcenter.intel.com/
download/25476/Windows-7-USB-3-0-Creator-Utility.
To install Windows(R) 7 in the Skylake platform:
Step1. U se this utility to pack XHCI driver into the original win7 OS image,
Step2. Use the new OS image to install via any device.
10. BIOS programmable connector (8-pin SPI)
Use this connector to flash the BIOS ROM.
EMB-Q170B
EMB-Q170B SPI flase
Programmable connector
Chapter 2: Motherboard information
USB56
PIN 1
EMB-Q170B
there will be another OS image released.
+3V_SPI
S_SPI_CS1#Q
S_SPI_MISO_2Q
(NC)
USB78
PIN 1
BIOS_P
PIN 1
GND
S_SPI_CLK_2Q
S_SPI_MOSI_2Q
(NC)
USB910
PIN 1
2-23
Advertisement
Table of Contents
