Aaeon EMB-H81B Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Motherboard
  5. EMB-H81B
  6. Manual

Aaeon EMB-H81B Manual

Industrial motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EMB-H81B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EMB-H81B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon EMB-H81B

Summary of Contents for Aaeon EMB-H81B

  • Page 1 EMB-H81B...
  • Page 2 E10854 Revised Edition V2 August 2015 Copyright Notice This document is copyrighted, 2015. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.

  • Page 3: Table Of Contents

    Contents Chapter 1: Product overview Package contents................. 1-1 Features ..................1-1 Specifications ................1-2 Chapter 2: Motherboard information Before you proceed ..............2-1 Motherboard layout ..............2-2 Screw size ..................2-4 2.3.1 Component side .............. 2-4 2.3.2 Solder side ..............2-5 Central Processing Unit (CPU) ...........
  • Page 4 3.3.6 SATA Configuration ............3-6 3.3.7 PCH-FW Configuration ........... 3-6 3.3.8 AMT Configuration ............3-6 3.3.9 USB Configuration ............3-6 3.3.10 NCT6791D Super IO Configuration ........ 3-7 3.3.11 NCT6791D HW Monitor ..........3-7 Chipset menu ................3-8 3.4.1 System Agent (SA) Configuration ........3-8 3.4.2 PCH-IO Configuration ........... 3-10 Boot menu .................. 3-11 3.5.1 Boot Configuration ............

  • Page 5: Chapter 1: Product Overview

    Chapter 1 Product overview Package contents Check your industrial motherboard package for the following items. 1 x Industrial Motherboard 1 x SATA cable and SATA power cable 1 x I/O Shield 1 x Support CD NOTE: If any of the above items is damaged or missing, contact your distributor or sales representative immediately.

  • Page 6: Specifications

    Up to 4096 x 2160 @24 Hz / 3840 x 2160 @60 Hz, with Digital DisplayPort Audio LVDS Up to 1920 x 1200 @60 Hz, Dual Channel 18/24 bit Backlight Control Voltage / PWM (continued on the next page) EMB-H81B...
  • Page 7 Storage 2 x SATA 6Gb/s 1 x SATA 3Gb/s 1 x Full / Half size Mini Card (mSATA) 1 x Half size Mini Card (PCIe+USB) 2 x USB 3.0 ports(Rear IO), 6 x USB 2.0 ports (2 ports at the back panel, 4 ports at mid board) Display I/O 1 x LVDS, 1x HDMI, 1x DP, 1x VGA Mic-in, Line-out, AAFP at internal connector for 2 additional chan-...
  • Page 8 2 x USB 2.0 connectors support additional 4 USB ports (2.00 mm) OTHERS Windows 7 32 bit OS Support Windows 7 64 bit Windows 8 32 bit Windows 8 64 bit Linux Fedora Accessories 1 x SATA cable 1 x SATA power cable I/O Shield Support DVD NOTE: Specifications are subject to change without notice. EMB-H81B...

  • Page 9: Chapter 2: Motherboard Information

    The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. VS_PWR Main Power Main Power Off SB_PWR Standby Power Powered Off EMB-H81B Onboard LEDs Chapter 2: Motherboard information...

  • Page 10: Motherboard Layout

    HDMI DDR3 DIMM_B1 (64bit, 204-pin module) SPI_1 USB1112 USB56 USB34 CLRTC USB3_12 Place this side USB910 towards the rear Intel ® of the chassis 8111G LAN1 LGA1150 LAN2 8111G MINICARD1 LINE-OUT AAFP BATTERY1 AMP_CON VS_PWR DIS_ME MIC-IN SB_PWR PCIEX1 EMB-H81B...
  • Page 11 Connectors/Jumpers/Slots Page DC power connector (DC_PWR2) 2-17 PS/2 keyboard/mouse connector (6-pin KBMS) 2-21 CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) 2-18 Serial ATA 3.0Gb/s connector (7-pin SATA3G_1) 2-26 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2) 2-22 COM1 Ring/+5V/+12V selection (COM1_VSET) 2-14 Serial port connectors (10-pin COM1, COM2) 2-24 Digital I/O connector (10-pin DIO) 2-20 LVDS connector (30-pin LVDS) 2-19 10. Inverter Backlight Control mode selection (3-pin LJ3) 2-15 11. Inverter voltage selection (3-pin LJ2) 2-14 12. LVDS panel voltage selection (3-pin LJ1) 2-14 13. Backlight inverter power connector (5-pin INV) 2-25 14. Front panel system panel connector (10-1 pin F_PANEL) 2-21 15. Chassis intrusion connector (4-1 pin CHASSIS) 2-20 16. Internal speaker connector (4-pin SPEAKER) 2-22 17.

  • Page 12: Screw Size

    170.18 165.23 168.78 157.73 168.02 154.19 154.94 152.14 142.33 129.10 118.75 115.86 105.03 97.81 85.35 81.04 66.80 67.36 64.28 54.09 49.85 51.82 42.16 41.69 44.96 38.55 42.36 27.37 23.69 16.03 11.85 16.04 11.10 14.43 10.91 2.10 10.49 0.00 16.46 EMB-H81B...

  • Page 13: Solder Side

    2.3.2 Solder side 170.18 165.10 165.10 156.87 153.95 92.94 81.86 33.02 10.16 0.00 Chapter 2: Motherboard information...

  • Page 14: Central Processing Unit (Cpu)

    Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1150 socket designed for the Intel® 4th Generation Core™ i7 / Core™ i5 / Core™ i3, Pentium / Celeron ® ® processors. EMB-H81B CPU socket LGA1150 IMPORTANT: Unplug all power cables before installing the CPU. CAUTION! • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. The manufacturer will shoulder the cost of repair only if the damage is shipment/transit-related. • Keep the cap after installing the motherboard. The manufacturer will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1150 socket.

  • Page 15: Installing The Cpu

    2.4.1 Installing the CPU CAUTION! LGA1156 CPU is not compatible with the LGA1150 socket. DO NOT install an LGA1156 CPU on the LGA1150 socket. Chapter 2: Motherboard information...
  • Page 16 EMB-H81B...

  • Page 17: Cpu Heatsink And Fan Assembly Installation

    2.4.2 CPU heatsink and fan assembly installation CAUTION! Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly Chapter 2: Motherboard information...
  • Page 18 To uninstall the CPU heatsink and fan assembly EMB-H81B 2-10...

  • Page 19: System Memory

    System memory This motherboard comes with two Double Data Rate 3 (DDR3) Small Outline Dual Inline Memory Module (SO-DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption. The figure below illustrates the location of the DDR3 SO-DIMM sockets: DIMM_A1 DIMM_B1 Channel Sockets Channel A SO-DIMM_A1 EMB-H81B 204-pin DDR3 SO-DIMM sockets Channel B SO-DIMM_B1 Chapter 2: Motherboard information 2-11...

  • Page 20: Installing A Dimm

    2.5.1 Installing a DIMM To install a DIMM To remove a DIMM EMB-H81B 2-12...

  • Page 21: Jumpers

    Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. EMB-H81B Clear RTC RAM To erase the RTC RAM: Turn OFF the computer and unplug the power cord. 2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5~10 seconds, then move the cap back to pins 1-2. Plug the power cord and turn ON the computer. 4. Hold down the <Del> key during the boot process and enter BIOS setup to reenter data.
  • Page 22 +12V Ring (Default) EMB-H81B COM1 Ring/+5V/+12V selection Setting Pins +12V Ring (Default) LVDS panel voltage selection (3-pin LJ1) (Default) EMB-H81B LVDS Panel Voltage selection Pins +3.3V (Default) Inverter voltage selection (3-pin LJ2) +12V (Default) EMB-H81B Inverter Voltage selection Pins +12V +5V (Default) EMB-H81B...
  • Page 23 Inverter Backlight Control mode selection (3-pin LJ3) DC mode PWM mode (Default) EMB-H81B Mode Selection for Back Light Control of Inverter Pins DC Voltage Control (Default) PWM Control Intel ME Jumper (3-pin DIS_ME) ® This jumper allows you to force Intel Management Engine (ME) boot from ® recovery mode when ME become corrupted. DIS_ME Enable ME Disable ME flash security...

  • Page 24: Connectors

    LAN (RJ-45) ports. These ports allow Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. LAN port LED indications Speed Activity Link ACT/LINK LED SPEED LED Status Description Status Description No link 10 Mbps connection GREEN Linked ORANGE 100 Mbps connection LAN port BLINKING Data activity GREEN 1 Gbps connection EMB-H81B 2-16...

  • Page 25: Internal Connectors

    Speaker Out 2.7.2 Internal connectors DC power connector (4-pin DC_PWR2) This connector is for the DC power plug. The power supply plug is designed to fit this connector in only one orientation. Find the proper orientation and push down firmly until the connector completely fit. DC_PWR2 PIN 1 EMB-H81B DC-In 4P Power connector SATA power connector (4-pin SATA_PWR) This connector is for the SATA power cable. The power cable plug is designed to fit this connector in only one orientation. Find the proper orientation and push down firmly until the connector completely fit. SATA_PWR PIN1 +12V EMB-H81B SATA POWER connector Chapter 2: Motherboard information...
  • Page 26 CAUTION: Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! NOTE: The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power. Audio amplfier connector (4-pin AMP_CON)  This connector is for an internal stereo amplifier speakers support (2W/4 via WtoB header). AMP_CON PIN 1 EMB-H81B Audio Stereo Output with Amp connector EMB-H81B 2-18...
  • Page 27 LVDS1_D1- LVDS0_D1- LVDS VCC LVDS1_D0+ LVDS0_D0+ LVDS1_D0- LVDS0_D0- Back Light Control LVDS Panel Enable PIN 1 EMB-H81B LVDS Panel Signal connector Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP PIN 1 PIN 1 HD-audio-compliant Legacy AC’97 pin definition...
  • Page 28 CHASSIS Intruder Intruder No Intruder PIN1 EMB-H81B Chassis Intrusion connector Digital I/0 connector (10-pin DIO) This connector includes 8 I/O lines (In/Out programmable). All of the Digital I/O lines are programmable and each I/O pin can be individually programmed to support various devices. PIN 1 EMB-H81B Digital I/O connector NOTE: To configure the I/O pins in BIOS, go to the Advanced tab > Dynamic Digital IO.
  • Page 29 (NC) RSTCON# PWRBTN# PWR_LED- HDD_LED- PWR_LED+ HDD_LED+ PIN 1 EMB-H81B Front panel system connector • System power LED (2-pin PWR_LED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin HDD_LED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is...
  • Page 30 12. Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2) These connector connects to Serial ATA 6.0 Gb/s hard disk drives or an optical drive via Serial ATA 6.0 Gb/s signal cables. EMB-H81B SATA 6.0Gb/s connectors NOTE: You must install Windows XP Service Pack 3 or later version before ® using Serial ATA hard disk drives. Speaker connector (4-pin SPEAKER) The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. SPEAKER Speaker Out PIN 1 EMB-H81B Speaker Out connector 14. Minicard connectors Use these connectors to connect a Minicard device.
  • Page 31 CAUTION! Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard. NOTE: The USB cable is purchased separately. 16. SPI Flash programmable connector (8-pin SPI_1) This connector is for SPI flash program machine. Connect the flash BIOS cable to this connector. SPI_1 (NC) (NC) SPI_MOSI SPI_MISO SPI_CLK SPI_CS# +3V_SPI PIN 1 EMB-H81B SPI Flash programmable connector NOTE: The flash BIOS cable is purchased separately. Chapter 2: Motherboard information 2-23...
  • Page 32 17. Serial port connectors (10-pin COM1, COM2) These connectors are for serial (COM) ports. Connect the serial port cables to these connectors, then install the module to a slot opening at the back of the system chassis. COM1 COM2 PIN 1 PIN 1 EMB-H81B Serial port connectors Signal Signal DCD (422TXD-/485DATA-) RXD (422RXD+) TXD (422TXD+/485DATA+) DTR (422RXD-) RI/+12V/+5V N.C. NOTES: • The serial port cables are purchased separately. • Only COM1 can support RS-422 and RS-485. EMB-H81B 2-24...
  • Page 33 18. Battery connector (2-pin BATTERY1) This connector is for the lithium CMOS battery. BATTERY1 +BAT PIN 1 EMB-H81B Battery connector 19. Backlight inverter power connector (5-pin INV) Connect the backlight inverter power cable to this connector. Back Light Enable Back Light Control Inverter VCC PIN1 EMB-H81B Inverter connector NOTE: The backlight inverter power cable and the inverter module are purchased separately. Chapter 2: Motherboard information...

  • Page 34: Power Supply Considerations

    20. Serial ATA 3Gb/s connectors (7-pin SATA3G_1) This connector connects to a Serial ATA 3Gb/s hard disk drive or an optical drive via a Serial ATA 3Gb/s signal cable. EMB-H81B SATA 3.0Gb/s connector NOTE: You must install Windows XP Service Pack 3 or later version before ® using Serial ATA hard disk drives. Power Supply Considerations CAUTION! • The external DC jack (5.5/2.5mm) is the primary power input connector of EMB-H81B. However, the desktop board also provides an internal 2 x 2 power connector that can be used in custom-developed systems that have an internal power supply. • There is no isolation circuitry between the external DC jack and the internal 2 x 2 power connector. It is the system integrator’s responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external DC jack is covered if the internal 2 x 2 power connector is to be used.

  • Page 35: Chapter 3: Bios Setup

    Chapter 3 BIOS setup BIOS setup program Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: Press <Delete>...

  • Page 36: Bios Menu Screen

    Aptio Setup Utility - Copyright (C)2013 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information Set the Date. Use Tab EMB-H81B R0.C(EH81AM0C)(09/04/2013) to switch between Date elements. BIOS Vendor American Megatrends Core Version 4.6.5.4; X64 Compliancy UEFI 2.3.1; PI 1.2...

  • Page 37: Main Menu

    Aptio Setup Utility - Copyright (C)2013 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information Set the Date. Use Tab EMB-H81B R0.C(EH81AM0C)(09/04/2013) to switch between Date elements. BIOS Vendor American Megatrends Core Version 4.6.5.4; X64 Compliancy UEFI 2.3.1; PI 1.2...

  • Page 38: Advanced Menu

    The items in this menu allows you to configure the Digital IO as input or output and Digital IO Output as high or low. GPIO 0~3 [Input] Allows you to set the GPIO 0~3 as Input or Output. Configuration options: [Input] [Output] EMB-H81B...

  • Page 39: Acpi Settings

    GPIO 4~7 [Output] Allows you to set the GPIO 4~7 as Input or Output. Configuration options: [Input] [Output] Output Level [Hi] Allows you to set the Output Level as high or low. Configuration options: [Hi] [Low] 3.3.3 ACPI Settings This item allows you to change the ACPI settings. ACPI Sleep State [S3 only (Suspend to...] Allows you to select the ACPI Sleep State that the system will enter when the SUSPEND button is pressed.

  • Page 40: Sata Configuration

    The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Disabled] The USB devices can be used only for the BIOS setup program. EMB-H81B...

  • Page 41: Nct6791D Super Io Configuration

    [Auto] Allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. 3.3.10 NCT6791D Super IO Configuration Allows you to configure the system super I/O chip parameters. Serial Port1~2 Configuration The sub-items in this menu allow you to set the serial port configuration.

  • Page 42: Chipset Menu

    Configuration options: [32M] [64M][96M] [128M] ~ [416M] [448M] [480M] [512M] [1024M] DVMT Total Gfx Mem [256M] Allows you to select the total amount of system memory allocated to DVMT 5.0 used by the Internal Graphics Device. Configuration options: [128M][256M] [MAX] EMB-H81B...
  • Page 43 Primary IGFX Boot Display [VBIOS Default] Select the Video Devices which will be activated during POST. Configuration options: [VBVIOS Default] [CRT] [Display Port] [HDMI] [LVDS] LVDS Enable [Enabled] Configuration options: [Disabled] [Enabled] LVDS Panel Type [1024x768, 18bit, 60Hz] Select the type of LCD panel used as display. Configuration options:[640x480, 18bit, 60Hz] [800x480, 18bit, 60Hz] [800x600, 18bit, 60Hz][1024x600, 18bit, 60Hz] [1024x768, 18bit, 60Hz] [1024x768, 24bit, 60Hz][1280x768, 24bit, 60Hz] [1280x1024, 48bit, 60Hz]...

  • Page 44: Pch-Io Configuration

    Configuration options: [Enabled] [Disabled] Mini-PCIe port 1 Speed and PCIe x1 Slot Speed [Auto] Allows you to select the PCI Express port speed. Configuration options: [Auto] [Gen1] [Gen 2] Case Open Warning [Disabled] Configuration options: [Disabled] [Enabled] [Clear] EMB-H81B 3-10...

  • Page 45: Boot Menu

    Boot menu The Boot menu items allow you to change the system boot options. Aptio Setup Utility - Copyright (C)2013 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Boot Configuration Enables or disables Quiet Boot option Quiet Boot [Enabled] Launch PXE OpROM policy [Disabled]...

  • Page 46: Security Menu

    Select the Administrator Password item and press <Enter>. From the Enter Current Password box, key in the current password, then press <Enter>. From the Create New Password box, key in a new password, then press <Enter>. Confirm the password when prompted. EMB-H81B 3-12...
  • Page 47 To clear the administrator password, follow the same steps as in changing an administrator password, but press <Enter> when prompted to create/confirm the password. After you clear the password, the Administrator Password item on top of the screen shows Not Installed. User Password If you have set a user password, you must enter the user password for accessing the system.

  • Page 48: Save & Exit Menu

    Select Yes to save as user defaults. Restore User Defaults This option allows you to restore the User Defaults to all the setup options. When you select this option, a confirmation window appears. Select Yes to resotre user defaults. EMB-H81B 3-14...
  • Page 49 Boot Override These items displays the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device. Chapter 3: BIOS setup 3-15...
  • Page 50 EMB-H81B 3-16...

  • Page 51: Appendix

    Check local regulations for disposal of electronic products. DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. EMB-H81B...
  • Page 52 印 刷 電 路 板 及 其 × ○ ○ ○ ○ ○ 電子組件 外 部 信 號 連 接 頭 × ○ ○ ○ ○ ○ 及線材 ○： 表示該有毒有害物質在該部件所有均質材料中的含量均在 SJ/T 11363- 2006 標准規定的限量要求以下。 ×： 表示該有毒有害物質至少在該部件的某一均質材料中的含量超出 SJ/T 11363-2006 標准規定的限量要求，然該部件仍符合歐盟指令 2002/95/ EC 的規范。 備註：此產品所標示之環保使用期限，係指在一般正常使用狀況下。 EMB-H81B...

Table of Contents