Aaeon EMB-Q170B Manual page 42

Critical Temp Tolerance [xx]
Input tolerance of critical temperature. The values range from 0~7.
Fan Count Step Up [xx]
Input fan count up unit. The values range from 0~15.
Fan Count Step Down [xx]
Input fan count down unit. The values range from 0~15.
Fan Out Step Up Time [xx]
Input the time that Fan Out takes to increase its value by one step with an interval
of 0.1 second. The values range from 0~15.
Fan Out Step Down Time [xx]
Input the time that Fan Out takes to decrease its value by one step with an interval
of 0.1 second. The values range from 0~15.
The following item appears only when you set Fan Control Mode to [Smart FAN
IV Mode].
PWM/DC Voltage Output [xx]
Input a PWM/DC voltage output value. The values range from 0~255.
The following 9 items appear only when you set Fan Control Mode to [Thermal
Cruise Mode].
Target Temperature [xx]
Input the fan control target temperature. The values range from 0~127.
Tolerance of Temperature [xx]
Input tolerance of target temperature. The values range from 0~7.
Fan Out Start-Up Value [xx]
Input fan out start-up value. The values range from 0~127.
Fan Stop Duty [Down to 0]
Select the fan stop duty. Configuration options: [Down to 0] [To Fan Out Stop
Value]
Fan Out Stop Duty [xx]
The Fan Out value decreases to this value if the temperature is below the lower
temperature limit. The values range from 0~255.
Fan Out Stop Time [xx]
Determines the time it takes Fan Out value to fall from the stop value to 0. The
3-8
EMB-Q170B